Semi automatic Small Paint Rectangular Can Packaging Line
*** *** Tin Can Cutting Machine
1. Main Parameter :
| Model: | GT1B5 |
| Max sheet thickness: | 0.4mm |
| Max sheet width: | 1050mm |
| Min sheet width | 44mm |
| Motor power: | 1.1kw |
| Net weight: | 1400kgs |
| Dimension: | 1500x1600x1105mm |
2. Machine features :
1). Motor: Joint Venture Brand Siemens-Beide(Siemens Standard Motors Ltd.);
Electric Parts: Schneider
2). The machine is with high cutting accuracy and good efficiency.
It is easy and convenient to adjust the knives.
3). The knives adopt high-alloy steel material: Cr12MoV
And our machine is with a grinding machine for knife grinding.
3. Main parts material or brand of Tinplate Metal Sheet Gang Slitter Machine :
Material of Knife: Cr12MoV
Electric parts brand: Schneider
Motor brand: Siemens (joint venture)
*** *** Tin Can Body Roll Forming Machine
1. Main Parameter:
Specification Of Automatic Roll Forming Machine:
| Model | ZDJY120-320 | ZDJY120-280 |
| Production capability | 30~120Cans/min |
| Applicable can height | 70~320mm | 70~280mm |
| Applicable can diameter | 52~180mm |
| Applicable material | Tinplate steel-based |
| Applicable material thickness | 0.15~0.35mm |
| Applicable material hardness | T2.5-DR8 |
| Compress air consumption | 600L/min |
| Pressure of compress air | 0.5 MPa ~0.7MPa |
| Power | 380V , 50Hz , 1KW |
| Dimension | 700×1100×1200mm | 650×1100×1200mm |
| Weight | 350Kg | 340Kg |
*** *** Can Body Seam Welding Machine
1.Main Parameter:
Specification Of Automatic Tin Can Welder FH18-65:
| Linear rate of welding | 6-36m/min |
| Production capability | 60~120Cans/min |
| Applicable can diameter | Ø65~ø176mm |
| Applicable can height | 70~320mm |
| Applicable material | Tinplate steel-based Chrome |
| Applicable material thickness | 0.16~0.30mm |
| Seam welding landing | 0.4mm 0.6mm |
| Seam point distance | 0.5~0.8mm |
| Applicable copper wire diameter | Ø 1.38mm ø 1.5mm |
| Cooling water | Temperature:12-18°C Pressure:0.4~05Mpa
Discharge:10L/min |
| Power | 380V±5% 50HZ |
| Total power | 18KVA |
| Dimension | 1750×1100×1800mm |
| Weight | 1800Kg |
2.Features:
1) PLC(Programmable Logic Controller) is purchased from Japanese MITSUBISHI.
2) Low voltage apparatus are produced by SCHNEIDER.
3) IGBT(Insulated Gate Bipolar Transistor) is bought from Japanese FUJI.
4) OMRON is our sensor supplier.
5) HMI(Human Machine Interface) is purchased from WEINTEC Labs.,Inc in Taiwan.
3.Usage:
1) It is widely used for various tin can auto welder, such as food can, chemical, aerosol can and so on.
2)Can body internal and external coating machine and can body oven are optional to be added in production line
*** *** GT Can Body Former Machine
1.Technical Parameter:
| Model | GT3F3Y\3F4Y |
| Diameter | 1L - 4L |
| Height | 270-400mm |
| Capacity | 20-30cans/min |
| Power | 3kw |
| Net Weight | 700kgs |
| Dimension | 1300*780*1150mm |
2. Machine features:
1) The material of mould :Cr12MoV
2) Hydro-cylinder Parts:Compass
3)Pneumatic elements brand:Airtac (Taiwan)
4)This machine is for 1-5L cans flanging,after changing the flanging mould, can be used for Different volume cans.
*** *** GT Can Body Flanging Machine
1.Main Parameter:
| Model | GT3FB3/3FB4J |
| Applicative range | 1L-4L |
| Capacity | 30cans/min |
| Power | 0.75kw |
| Net Weight | 350kg |
| Dimension | 680*1020*800mm |
2.Main Features:
1) The material of mould :Cr12MoV
2) Hydro-cylinder Parts:Compass
3)Pneumatic elements brand:Airtac (Taiwan)
4)This machine is for 1-5L cans flanging,after changing the flanging mould, can be used for Different volume cans.
This is electrical flanging machine for tin can.The flanging specification meet the international standard.After changing the flanging mold, can be used for square can,round can and other regular shapecans.
*** *** Square Tin Can Sealing Machine
1.Main technical parameters:
| Model: | GT4A16B |
| Capacity: | 15-30cans/min |
| Diameter: | 45-230mm |
| Maximum Height: | 280mm |
| Net weight: | 600kgs |
| Power: | 1.5kw |
| Dimension: | 750x530x1980mm |
2. Machine features:
1) It is specially applied to seal the round cans (diameter: 50-230mm).
2) The structure is compact, the sealing force is powerful and the sealing density is good.
3) It avails the pneumatic cylinder updraft the cans to reduce the labor intensity.
4) The electronic component: SCHNEIDER
5) The sealing mold adopts high alloy steel and is durable.
3. Main parts material or brand:
Material of chuck and seaming roller: Cr12MoV
Electric parts brand: Schneider
Motor brand: Siemens (joint venture)
4.Packaging & Shipping
1) Packaging
Our products usually packed in plywood case.
2) Shipping
Our products usually use Sea transportation,Air transportation.
5.Our Services
Our products' warranty is 1 year!
If there is any quality problem with our machine during the warranty period, we will offer free parts for customer for fix the machine.
6.About US:
We are a professional manufacturer in tin can making machinery with 15 years experience in China. We provide various tin can making machines and complete customized tin can production lines,like food can ,aerosol can ,pail can ,and so on.We exported our machines to lots of countries,such as, Russia, Dubai, Saudi Arabia, Cameroon, Indonesia, Vietnam, and etc. We won high reputation by good quality, competitive prices and superior after-sale service.
Audited Supplier 
){kind=link}